Welding over Picklex® 20 coating, compared to AWS or ASME Code Welding
Picklex® 20 provides much better welding than AWS/ASME code welding.
Welding without removing Mill scale. Eliminates Hydrogen embrittlement (chances of Weld failure is almost Zero). Zero Weld failure since 1998. Acts as an Anti- Spatter.
Welding can be performed over Picklex® 20 coated metal surface after complete drying.
Performance/Benefits of welding through Picklex® 20 coating on Cold rolled steel/Stainless steel:
- Picklex® 20 completely prepares the metal surface by removing mill oil/cutting fluid, flash rust and put a nano weldable conversion coating in One Step.
- Increases weld strength considerably on Cold rolled and Stainless steel.
- Does not cause hydrogen embrittlement and so the chance of weld failure is Zero, which means No Re-work, saving a lot of labor, time & cost. There has been zero welding failure since 1998
- Acts as an Anti-spatter saving labor, time & cost
- After Welding and removal of the weld scale, spraying Picklex® 20 on the welding area provides a very long-term indoor rust protection
- Provides good adhesion of the welding area with the top coating
Performance/Benefits of welding through Picklex® 20 coating on Hot rolled steel with Mill Scale:
- Picklex® 20 completely converts the mill scale to a conversion coating through which welding can be performed after complete drying (dried by Heat Gun). This eliminates removal of the mill scale before Welding.
- Weld strength is still higher compared to the AWS or ASME code welding method (which is performed after removing mill scale).
- Does not cause hydrogen embrittlement. The chances of weld failure is zero
- Acts as an Anti-spatter
- After welding and removal of the weld scale, spraying Picklex® 20 on the welding area provides a very long-term indoor rust protection before top coating
- Provides good adhesion with the top coating
- Saves a lot of labor, time & cost from removal of mill scale and weld spatters
WELDING OVER PICKLEX® 20 COATING
Left – Welding without Picklex® 20 coating Weld Spatter Right – Welding over Picklex® 20 coating No Weld Spatter
Left – Welding without Picklex® 20 coating Weld Spatter Right – Welding over Picklex® 20 coating No Weld Spatter
Left – Welding without Picklex® 20 coating Weld Spatter Right – Welding over Picklex® 20 coating No Weld Spatter
Left – Welding without Picklex® 20 coating Weld Spatter Right – Welding over Picklex® 20 coating No Weld Spatter
Left-Welding over Picklex® 20 coating No Weld Spatter Right- Welding without Picklex® 20 coating Weld Spatter
© International Chemical Products, Inc.