Revolutionary Change in Metal Surface Preparation from Beginning to Finishing
ELIMINATING ALL HAZARDOUS/TOXIC CHEMICALS INCLUDING BLASTING FROM METAL SURFACE PREPARATION
SOLVING ENVIRONMENTAL PROBLEMS CREATED BY THE METAL INDUSTRIES USING HAZARDOUS/TOXIC CHEMICALS, BLASTING ETC.
EPA Tested/Verified Product
No Rust problem. No Indoor Rust Protection problem. No Weld failure. No Adhesion failure (even on edges & corners) since 1998.
Eliminating Blasting & Re-work from Metal Surface Preparation Process
Providing much better Welding than AWS and ASME Code Welding
Eliminate Removal of Mill Scale from Hot Rolled Steel & still achieve 1000 Hours of Salt spray test (ASTM B117) with two-part Epoxy Primer & Liquid Paint
Perform Powder Coating on Hot Rolled Steel without removing the mill scale
Unique Zero Cost Green Product/Process for Complete One Step Metal Surface Preparation/Pre-treatment before Liquid Painting, Powder Coating, E-coating etc. with Zero Waste Disposal. Eliminates removal of Mill scale for Hot rolled steel (see process under About)
Replacing Acid/Iron/Zinc Phosphate/Chromate systems with Equal or Better-quality Results
REBAR COATING (Rust protection during storage & inside Concrete)
REPLACES ALODINE (Chromate Conversion Coating)
REPLACES WASH PRIMER WITH CHROMATE (exceeded 1000 hours of salt spray test)
REPLACES NITRIC ACID FROM STAINLESS STEEL PASSIVATION
KEEPING THE ENVIRONMENT CLEAN
COMPLETELY SOLVES ALL QUALITY PROBLEMS IN THE METAL INDUSTRIES SUCH AS, RUSTING PROBLEM, VERY LONG-TERM INDOOR RUST PROTECTION PROBLEM (FOR SEVERAL YEARS), WELDING & ADHESION FAILURES FOR ALL KIND OF METALS (FERROUS & NON-FERROUS)
Removes Surface Rust. Years of Indoor Rust Protection
Completely Prepares the metal surface Rust/contamination free for Welding, Priming, Liquid Painting, Electrostatic Painting, Powder Coating, E-coating and also for very High Temperature Paint and Coating (Epoxy, Ceramic coating etc.)
IMAGINE A PRODUCT THAT REDUCES LABOR, TIME & COST SO MUCH,
THAT YOU GET MORE THAN YOUR MONEY BACK AFTER USE!!!
Therefore, the Payback is immediately after using the Product
(With more money back, depending on how many steps are eliminated)
ZERO PRODUCT COST AFTER USE
By Eliminating one or more Traditional steps including Blasting & Re-work from Metal Surface Preparation Process
MADE IN USA
Complete Green Process
The Picklex 20 Green Manufacturing Process results in zero waste disposal. The product reduces the welding and adhesion (bonding) failures to zero in the manufacturing/metal fabricating, construction processes, eliminating re-work.
Save Labor, Time, Cost & Energy
Saves a lot of conventional steps, labor, time, cost & energy (around 50% to over 80% depending on the number of applications). Product costs comes out to be few cents per sq. ft. of metal surface along with couple of minutes of labor time.
Award-Winning Technology
Picklex® 20 is the only pre-treatment (conversion coating) which can be brushed on a metal surface at room temperature without rinsing and completely removes the oxidation from the metal surface, provides a Conversion coating, Seals the coating and stops the oxidation process, all in One Step.
© International Chemical Products, Inc.